PIXHAWK PX4 Flight Controller Bundle – Full-Featured Autopilot Kit with GPS, Telemetry, OSD, Safety Switch, Buzzer, and SD Card

Description

Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller   Features: 1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system; 2. 14 PWM / servo output; 3. Bus interface (UART, I2C, SPI, CAN); 4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe; 5. Provide automatic and manual modes; 6. Provide redundant power input and failover; 7. Multicolor LED lights; 8. Provide multi-tone buzzer Interface   9. Micro SD recording flight data;   Specifications: ​ Microprocessor   1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit 2. frequency: 168MHZ, 256K RAM 3.32 STM32F103 backup coprocessor   Sensor 1.L3GD20 3-axis digital gyroscope 16 2.LSM303D 3-axis accelerometer 14 / Magnetometer 3.MPU6000 6-axis accelerometer / magnetometer 4.MS5607 precision barometer   Interface 1 .5 high voltage compatible UART 1, 2 with hardware flow control 2. 2 CAN 3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input 4.Futaba SBUS compatible inputs and outputs 5.PPM Signal Input 6.RSSI (PWM or voltage) Input 7.I2C 8.SPI 9.3.3 and 6.6VADC input 10. External MICRO USB Interface     It is suitable for flight control of Pixhawk, etc. and is used to display the status information of aircraft. This module is connected to Pixhawk’s I2C interface   Note: To upgrade the firmware of the display to 3.5 or more, set NTF_DISPLAY_TYPE to 1 in the Massion Planner and restart Pixhawk.     NOTE: Before connect with the computer, you need to insert the SD card first , then flash the program, otherwise the LED indicator will not light up.   The RGB with sell or without shell send at random.     Packing list: (full set as your choose)     Pixhawk 2.4.8  32bit ARM Flight Controller x 1   anti-vibration Shock Absorber Board x1   Safety button and buzzer x 1    RGB x 1 ​​​ 4G  card (IO firmware has written)  x 1   Neo-M8N Gps Module  x 1    Black Gps Holder x 1    Power Module x 1    Minim OSD or OSD OLED Display  x 1 ( send as your choice, same with picture which you choosed )   I2C Splitter Expand Module x 1   PPM Module w/ shell  x 1   433/915 MHZ 100mw / 500mw telemetry x 1   ( send as your choice)     6pin turn 6pin cable x 1   4pin turn 4pin cable x 1   3pin DuPont line x 1         Base kit Pixhawk 2.4.8 package included:   Pixhawk 2.4.8 32bit ARM Flight Controllerx 1 Safety buttonx 1 Buzzer x 1 4G card x1  RGB with Shell x1 PPM wth shell X1 I2C with shell X1 Shock Absorber x1  Power module x 1 Cables      
               

      433 / 915MHZ 100mw/ 250mw Telemetry pictures: (without OTG Cable)             433 / 915MHZ  V2 Telemetry 500MW : (with OTG cable )      

Explore more from our collection.